LARGE FLUSH WOOD HYBRID-FYRE™ ARCH

WHAT'S THE MAGIC

The Large Flush Hybrid-Fyre® Wood Insert is a massive home heater approved to fit into large zero clearance and masonry fireplaces with its 19 inch depth and 3.0 cubic foot firebox. This insert offers long 12 hour burn times and features a bypass damper, single air control and 180 CFM convection fan for more heat circulation. The Large Flush Wood Hybrid-Fyre® insert is up to 20% more efficient than a typical wood insert, burning less wood and delivering more heat. This model features a beautiful arched door and face designs.

This model features our revolutionary GreenStart^TM option for the modern wood burner; just load your wood and push a button! We’ve completely eliminated slow, cracked open door startups and laboring over fickle newspaper.

Specification

• Emissions: 1.90 Grams Per Hour (CORD WOOD)
• Heating Capacity:* Up to 2,500 Square Feet
• EPA Tested BTUs : 10,710 to 57,628 (CORD WOOD)
• “Real World BTUs:”** See Below
• Maximum Burn Time: Up to 12 Hours
• Firebox Size: 3.0 Cubic Feet
• Maximum Log Size: 24”
• Weight: 530 Pounds
• Construction: 5/16” to 1/4” Steel Plate
• LHV Overall Efficiency:*** Up to 84%
• HHV Overall Efficiency:*** Up to 78%
• Glass Viewing Area: Ceramic Glass, 24-1/2” W x 13” H, 307 Sq. In.
  * Heating capacity may vary depending on degree of home insulation, floor plan and ambient temperature zone of the area you live.
  ** EPA tests to determine BTU output are achieved with a single load of wood at each burn rate. At home, you are likely to add more wood to your insert to maintain your desired comfort level. By the simple process of loading your fireplace insert with additional wood, you could achieve up to a 20% higher heat output than established during EPA testing.
  *** Overall efficiency as tested using B-415.1 using Cord Wood. LHV = Low Heat Value, HHV = High Heat Value.